Luminaires must have a dimmable power supply unit capable of receiving either 1-10VDC or DALI dimming signal.
Controllers can be installed either inside the luminaire if there is a space for it or outside, directly on the pole as controller has IP68 protection rating.
No. Controllers establish local wireless mesh network between each other and there is enough if there is one internet gateway for group of luminaires.
There is no need for any configuration. Once the controllers are installed they start the communication and establish connection with central server software automatically.
No, there is no need for that. As our mesh network configures automatically there is no need to follow any particular order or predetermined locations for controller installation.
No, there is no need to install motion detectors to each lamp pole. Motion detectors connect with luminaire controllers via radio so the location for them can be chosen optimum for motion detecting.
Internet gateway can be installed any location within the radio coverage of local luminaire controller network.
No problem, as communication happens in wireless mesh network even far away controllers will be able send and receive data. Data is forwarded by other devices until it reaches final destination.
Yes, they still work according to the operating rules which are saved into each luminaire. They switch on and off and dim according to dimming schedule.