The luminaires must comply with the D4i standard, i.e. they must be equipped with a Zhaga book 18 compatible receptacle and a D4i certified LED driver.
The luminaire controllers are installed on the Zhaga Book 18 socket
No. Controllers establish local wireless mesh network between each other and there is enough if there is one internet gateway for group of luminaires.
There is no need for any configuration. Once the controllers are installed they start the communication and establish connection with central server software automatically.
No, there is no need for that. As our mesh network configures automatically there is no need to follow any particular order or predetermined locations for controller installation.
No, there is no need to install motion detectors to each lamp pole. Motion detectors connect with luminaire controllers via radio so the location for them can be chosen optimum for motion detecting.
Internet gateway can be installed any location within the radio coverage of local luminaire controller network.
No problem, as communication happens in wireless mesh network even far away controllers will be able send and receive data. Data is forwarded by other devices until it reaches final destination.
Yes, they still work according to the operating rules which are saved into each luminaire. They switch on and off and dim according to dimming schedule.